aqua biotica MBH 400 mixed bed ion exchange resin 600 g (31011

Product no.: 1490

28,00 EUR per kg Silicate Removal / Demineralization

Ion exchange resin, silicate resin
Mixed bed demineralization for ion exchange columns e.g. ATS silica filter or Aqualight filter.
Always install silica filter after an osmosis system.
Check MBH400 regularly, if the conductivity or the hardness of the water increases, then the resin must be changed. MBH/400 or MB20

Mixed bed resin of cation and anion exchanger

MBH400 is a mixed bed resin for effective residual demineralization of reverse osmosis water. The retention efficiency of reverse osmosis (RO) systems is only 90-97% for most ions. Complete demineralization is not possible with UO.
With MBH400, depending on the initial load, the residual salt concentration in a filter downstream of the UO system can be reduced to almost zero.
to zero, depending on the initial load. Especially in very saline areas, the use of MBH400 can be indispensable in water treatment.

Features and properties:
- Proportionate 50% cation and anion exchanger.
- Large exchange effective surface area.
- Reduces residual silicate content and residual hardness of osmosis water depending on the load.

Recommended use:
Depending on the filter size present, place the package contents in an appropriately designated mixed bed resin filter.
Prior to the first withdrawal of residual demineralized ultrapure water, the material should be flushed in flow for approximately 60 min.

Safety Instructions: Irritant. Avoid contact with skin and especially eyes. Keep out of the reach of children. Store in a safe place.
In case of eye contact, rinse eyes under running water. Consult a physician.

Available in 1000 mL and 2500 mL containers in pouch packaging.